Видео

Only reason im Celaning the pc is becouse after one year of not cleaning it its starting to randomly shut down And my friend said I should clean it

her accent reminded me of the deck sealent ad

4:00 you forgot to peel off the sticker from the water block xD

I heard compressed air is bad for the environment is there any better way to clean out all of that dust?

bullshit channel, didn't even answer the question in the title which is what most people are looking for when they came here, also there's a section cut into the video begging for subs like wtf? honestly the way she talk is so fast and lame it sounds like she doesn't even want to do it, if you ask for subs better put some actual effort to it

Still very relevant after 2 years, cleared my mind on what type of gpu I need to get cheers mate, BLACK MYTH WUKONG HERE I COME

thank you

ty

Why does my block wiggle a lot after tightening it

Is there programing needed in the new case after swapping?

There should be clear instructions on where air direction is. All the builds ive seen just mount their aio and never explained where the direction of air should go.

Thermaltake, I always find cases that I like online, But I don't know how to check if my components will fit, Do you have any advice, Or maybe case suggestions?

Miller Dorothy White Scott Jackson David

Will the Arctic Liquid Freezer III 280mm liquid cooler fit in the top panel?

I made it to the seconcd step, installing the PSU bracket and saw the GPU rails already installed with no explanations. You can't just skip steps in the instructions. I will look for another video

Wires make my brain hurt and seize up. Can’t see them plan out to be organized accordingly. 😢

I keep mine up on the desk, doing my first clean at 1.5yrs of ownership, and the only reason dust collected on it is because i smoke weed right next to my pc

Hall William Garcia Michael Lewis Margaret

никуя не видно

Great info but how do you install on the case?

Idea is amazing but led are visible. Need a bit diffusion

AND DONT FORGET: always do it indoors so all of that dust goes into your lungs and straight back into the pc

They are super loud..

Side-mesh: smart. Half blocking one of the front fans: anti-smart. I guess that's the most one can expect. Except that at the mATX case's height, one can have one or two with 5 instead of 4 PCIe slots, which would help with cooling the graphics card at no upsize. Sort of like this one's side-mesh (smart). And one also has a dumb front where parts are deliberately blocked, the Enermax Marbleshell MS21.

Really good vid. Thanks for the help!

But RTX is just the replacement for GTX since the 20th gen

I can’t get this to work at all not sure what I’m doing wrong

Wow, all the info I need in one video. Thank you so much!

What is a content creator, where can i lern or study that sh*t?

Hello.I really liked the Thermaltake Divider 170 TG Snow ARGB and I want to build an inexpensive assembly in it.Can you help me with choosing a motherboard for it? On an AM5 or Intel LGA1700. I really want to show people how inexpensive and beautiful a computer is in this case.

ugly case

Exactly the video I needed right now

I got a tower 200 with a ryzen 9 7950x3d and a 4090, also a 300 for the future. I was going to go with the 300 first but changed my mind. Can I get replacement black fans for my thermaltake swanfan ex 12 argb or am I better getting new ones. But in 140 no rgb. I tried to do all thermaltake but they didn't have thermaltake RAM at microcenter. I also really liked the nactua cooler. Finally do yall offer a military discount from the oem to make a small order.

Can I get replacement black fans for my thermaltake swanfan ex 12 argb or am I better getting new ones. But in 140 no rgb. I tried to do all thermaltake but they didn't have thermaltake RAM at microcenter. I also really liked the nactua cooler. Finally do yall offer a military discount from the oem to make a small order.

Please help me i was taking out the usb 3.0 socket thingy and it would not come out so i used a bit more force and you know the blue plastic thing that got ripped out and thankfully my pins are fine i just need to get the usb 3.0 cover the thing you plug the usb 3.0 cable into please help me

I have 6 toughfans I'm trying to connect so I would really like to know how to connect two boxes together. I can't seem to find the instructions on doing that anywhere

ye man i got a big problem my buddy buyd new ram he have Corsair Vengeance lpx 2x8 he wanne have better and more ram so he buyd Corsair Vengeance RGB PRO DDR4 3600MHz 32GB is the same mhz but what he did he try 2 put in the new ram and hes pc got black screen try all stuff i know but its not working try put the new ram in and remove the old one but no screen but i try one more step he put on if the new ram in the first slot but he power off the pc and flip the switch he take put the graphics card and the coms battery left it out for 5 min or more after the put in the one off the new ram in the first slot and the coms battery and turn on the switch and the pc boot up got in the bios and windows but wanne he try 2 put in one more off the new ram the pc give a black screen so he reset all and try one more time but it did work the sec time the motherbord is a asus 760b d4 so i dont know what is the problem here can you plizz help us ty you

Thanks a lot! Will 750 Watt powerblock be enough for shown system + 196 bit 2 fans video card?

how is TT managing the GPUS that use vapour chambers? those GPUS cant be mounted with I/O up or temps will rocket to max in mere minutes

Literally building a PC backwards.

I just got a PC and try to use it for the first time and it won't turn on. I'm computer slow I struggle to use Facebook.

Could be a Squirter

This video is godsend! I did my first case swap without prior knowledge , just followed this vid and I did it successfully! Liked and subscribed!

I enjoy channels like these that make short and concise videos explaining exactly what I typed into the search bar. I don't need a historical or scientific lesson behind case fans. I have a package of 6 fans coming in pretty soon. Your explanations about the different pressures was very easy to understand. Now I'm comfortable opting for the positive pressure set up since my case is lower to the ground on an elevated platform so it's likely to grab more dust. Thanks very much for the video!

GREAT WORK HELPED

Я ничего не понял)) но все круто 👍 молодец.Привет из России.

I purchased a new CyberpowerPC a few weeks ago and noticed that I couldn't control my RGB colors from the fusion software. I spent a lot of time until I saw someone say there is a button on the top of the case which cycles through the different color options. I did that and everything works great. One thing that puzzles me is that none of the RGB headers on the motherboard have anything plugged into them. So how are the lights working? On cyberbpowerPC's do you know if there is a controller board? I don't want to go digging into the cables for the fear of breaking something since everything is working fine. But just for future knowledge how are the lights in my cyberpower working when nothing is plugged into the motherboard.

👍😎✌️

✌️😎👍🇩🇪

My PC build is so that the front of the computer has intake fans, while the back & too of the PC have exhaust fans. My PC case thankfully comes with dust filters, for the front & for the top in particular. I didn't even mention that I have a cooler fan for my GPU that comes separately from it. My case is huge as well, able to fit eight fans in the front (the front has two sets of slots for fans), one slot in the back & I can fit up to four fans on the top. I have an AIO cooler that has three 120mm fans. All of my fans are static pressure optimized as well. I dust out my computer once a month as well. Whenever I dust, I have so little dust in my machine. I do seek to protect my build, given how expensive the parts are.